 | | | Oracle on SUSE Linux | | I want to try to install Oracle Instant Client 10 and use it to access my 9i
database via ODBC from OpenOffice. I just downloaded and unzipped the
"Instant Client Package - Basic " and "Instant ClientHi
Our company uses SLES9+ORACLE. Oracle programers works with TOAD on WINDOWS.
I 've download TORA MAKE on SuSe9.3 and stop because of QT required
packets.
I 've check all QT from purchased SuSe9.3 I have Oracle 9i Enterprise Server installed on my Linux box. I have
OpenOffice installed on the same machine and would like to access the Oracle
database from it meaning I assume that I would nee <snip >
Certification Note
The following requirements are needed for a successful
installation of Oracle 9iR2 Linux Itanium on SuSE SLES9
o 1. Apply 9.2.0.5 patchset.
o 2. Looks pretty strange (because everything worked fine before) but when I set
up DELL 1650 with
Emulex LP8000 HBA ext3 file system on it and Orcle 10.2 system dies time
to time with panic message
Hello !
I have a small problem regarding a script which is working just fine (if I execute him directly) but when I put him in a cron job it does not do anything ! The script is like /opt/oracle/.Hi there
how can I tell Oracle CRS / the ocssd to open a database read only by default?
I need to do so due to security reasons in a disaster scenario but I can 't
find where to set a parameter.
Hi all
we are running Oracle 10g2 on our SLES9-Testservers and on one node the
multipathd dies right after starting (strace output is shown below).
Both nodes are patched to at least SP2 (Kernel 2I am new to Oracle and am preparing for a course that
being in October. After the successful installation
of 10gR2 on my laptop running SUSE 9.3 I get the
following message when I issue this command SLES9 SP2 have all necessary things embeded (including HBA drivers and
native multipath).
So if it works with Clarion (which is not standard in multipath
implementations) then it is always better toDoes anyone on the suse-oracle forum have any information about any
issues running Oracle 10GR2 on SLES9 SP1 for INTEL X86? We are needing
to decide on going with SLES9 SP1 or SP2 for the below issueI have installed 10g R2 Clusterware and Database Server with RAC on a
cluster with 2 nodes.
On the same cluster there has to be installed Forms and Reports Services
10g R2.
In order to have FRS asHI
Does anyone have an installation guide for Oracle 10G R2 on SLES8.
I have only found such a document for SLES 9. Could I use it?
Regards
Robert Scheckle
Database Administrator
______Peter Schinagl wrote
> pls. try to use SLES9-SP2.
>
> I got similar errors at AMD64/EM64T and also with IA32.
>
> Following suggestions where found
>
> - async i/o didn 't work with ReiserFS - > I 'm seeing stuff like this too often in /var/log/messages...
Sep 16 17 53 37 node1-cluster1 kernel ------------[ cut here ]------------
Sep 16 17 53 37 node1-cluster1 kernel kernel BUG at
fs/ocfs2Hello
What steps are required to allow for two 3GB instances of Oracle 10g running on a 32-bit SLES 9 server?
The total amount of ram in the server is 8GB. Has anyone else tried this? Or could you rI have a a server with the following
SLES9
Oracle 10gAS (9.0.4) /opt/oracle/product/10gAS
Oracle 9iR2 (9.2.0.4) /opt/oracle/product/9iR2
orarun-1.8-109.15
I have created multiple oracle homes for Hello All
I have Problems switch async IO on on my SLES9 / IA64 Installation.
It is 9.2.0.5.0 with the neccessary ASYNC IO Patch 3950500/3016968
I already relinked with no problems.
When I setup Here is what we currently have running in "TEST " mode
Oracle 10g RAC 64-bit
two 3 node clusters (4-cpus and 16gig ram each) (Using data guard to create
physical standby database)
ASM managing RAW diHi
I have tried the script you have provided thank you. I also removed the _netdev parameters from fstab. Now the automatic mount seems to work. Hopefully the memory allocation error disappears as Hi All
I am running SLES 9 SP2 Linux on a 2 node RAC cluster configuration
with NFS mounted Netapp filer and Oracle 9.2.0.6 RAC and 9.2.0.6 Cluster
Manager
The problem is when I shut down the instHi all
we are trying to get a RAC 10g running on SLES9 SP2 and with OCFS2. What we get is a not automatically mounting clusterfilesystem after reboot therefore a hanging RAC and no High AvailabiliI began to evaluate 10g2 RAC (unfortunately in i386 mode only) and find a
strange problem.
I can install using almost the same installation sequence (it is all
scripted)
- 10gR1 RAC
- 10gR1 CRS Hi all
I have to migrate a 9.2.0.5 database running on xSeries 445 32 bits / Suse
SLES9 SP2 / Oracle 9.2.0.5 32 bits to an xSeries 366 EM64T running Suse
SLES9 SP2 x64.
I recover a cold full backup Hi all
Iam trying to install RAC 9i (9.2.0.6) on 2 HP DL 585 + HP EVA 5000 +SLES 9
SP2 + OCFS2
Following instactions from the Oracle document "Step-By-Step Installation of
9.2.0.5 RAC on Linux "
TheHi
3 quick questions
1) Are SATA hard drives recommended for Oracle production DB?
(small to medium size average 20 concurrent users)
2) What is performance hit of Raid 1?
3) What is Raid 10ocfs2 panics on both nodes of the cluster while trying to create a database.
Sep 12 13 28 00 node1-cluster1 kernel (18 0) o2hb_write_timeout 165
ERROR Heartbeat write timeout to device sdb1 after > Haven 't done a relink - at least not recently (say in the last 6 weeks).
Well... Monday is here.. and almost gone where I 'm at. First thing I
did was try the relink all thing (thanks Andrew for Gil wrote
> I put ocfs2 mount and umount in the rcoracle script.
>
> But it makes sense to have an ocfs2 startup script. You may have some
> uses for it that don 't have nothing to do with the oraclHi Mauro
I don 't have Athlon box to try but check arch type by executing "uname
-m " If it returns anything other than i686 then create a link for lib
and bin from i586 to i686.
Example Start you |
|
|
