 | | | Oracle on SUSE Linux | | I have successfully installed and executed Oracle 10g
running on a SuSE 10 machine (i386). The database seems
to be stable and I 've had no problems with it.
The issue I 'm having is trying to configuHello
I made today today a successful install of Oracle Express on Suse Pro
9.3 running as domU with the xen kernel provided by suse. I am probably
going to use the xen image I made to distribute thHello
i 'm interested about the issue if the "new " i/o-scheduler (at first shipped with kernel 2.6) has any significant impact on the oracle performance.
I 'm still using kernel 2.4 and kind of displeHI!
After enable asyncIO on oracle 9i (9.2.0.6 64bit) and SLES9sp2
in /var/log/messages
Mar 19 20 15 57 smerch kernel JBD barrier-based sync failed on sda3 -
disabling barriers
Mar 19 20 16 20 smeDear All
I have a system in which SuSE Linux 7.0 is installed. I want to add 3-Com 3C2000-T card into the existing system. Can anyone tell me how to do this? I have tried using yast but not abl >
> Check If swap is in use i.e. top vmstat etc.
>
> If so stop all the unwanted process and reboot
> system for clean
> install. You should be fine as you had previous
> clean install.
>
Hi AruHello everyone
I am having a bit of a problem with XE. I did the
install yesterday everything went very smoothly but
the during the install I selected not have it start
automatically. I wanted to sHi Arun and Pierre
Quoting Arun Singh <Arun.Singh@(protected) >
> Hi Pierre
>
> > I 've never setup a cluster and there 's need to setup one for Oracle
> > here at work. Does SuSE 9.2 support cluster > I found too the packaging very easy to install and manage with the remark
> that the oracle colleagues have little ideea
> about the Linux FS Hierarchie everything (code data config) is placed Hello
I 'm trying to install 9i RAC on SLES9 SP3
and I 'm stuck.
I follow instructions from
"Step-By-Step Installation of 9.2.0.5 RAC on Linux "
found on metalink and at least one step seem to be notHello everyone
I was wondering if you may offer some insight on
Oracle 's XE edition it seems like a scaled down
version but how similiar is it to a real oracle
standard or enterprise server?? DoesOne more notice - update SLES to SP3 if you wil use iSCSI.
----- Original Message -----
From "Silviu Marin-Caea " <silviu_marin-caea@(protected) >
To <suse-oracle@(protected) >
Sent Wednesday MarWhy don 't make it in 3 independent steps
- migrate NFS files onto new filer using NetApp snapshorts
- migrate DB server to SuSe node by node (may be)
- migrate most important tablespaces onto SAN + AHello to all
Has anyone here already tryed to run oracle in a xen machine ? Looks
quite interesting for having a bunch of oracle express DB.
EK
--
Emmanuel Kasprzyk
Unix System Administrator
CocoonPintombeira
RMAN can receive commands through PIPE but backup pieces are created by shadow process (they are named channels) and they can 't be send to pipes. To send backup pieces from RMAN directlHi Admins
I have the problem that OCFS2 fences all nodes of a cluster if the shared
storage is lost. As far as I can see this seems to be desired behaviour - but
since I run more storages accessibHi
Can someone help me about make a backup with rman to a pipe and then write
it to tape ?? My device for tape is /dev/st0.
Thanks
[[]]
Pitombeira.
Hi
I 'm setting 9i RAC on server in a separated network
and I want to access these server over gateway acting as firewall/proxy
server.
What should I use for gateway/proxy/load balancing purposes ?Reposting as format messed up .. Sorry.
Original Q
I am working on NAS to SAN conversion project. What are the options(with
less down time) I have to convert from NAS to SAN storage and same time
We are running ocfs2 on a 2 node sles9 sp3 cluster but when we shutdown
node 0 node 1 shuts down with the following message
Mar 14 14 49 04 ract2 kernel (0 3) o2net_idle_timer 1306 connection toHi
I am working on NAS to SAN conversion project. What are the
options(with less down time) I have to convert from NAS to SAN storage
and same time going to Suse 64 bit AMD from RH 3.0 32 bit?
Hi Alexei
I contacted some days ago.
The problem was known and a few patches were released.
Regards
Fabrizio
After installing Oracle 9.2.0.5 on a SuSE Linux 10 machine I see the
following
Error occurred during initialization of VM
Unable to load native library /usr/oracle/JRE/lib/i386/libjava.so symbol
_I am trying to setup print queues for a new SLES-9 system. I am using the
kde printer manager. I have a couple of Xerox document center printers.
The print manager is saying it doesn 't recognize thegood day all ...
was playing around with installing 10gR2 onto a 10.1b6 system and it seems to get
itself stuck during the install process. i 've tried twice and it seems to fail at
linking ntcontab.
Hello
We get the following message in dmesg.
oracle[18245] bad frame in signal deliver frame 000000009691bba8
rip 2a9668fa11 rsp 9691bff8 orax ffffffffffffffff
oracle[18245] segfault at 000000009Hi
what is max recommended memory size for 32-bit systems without
special tricks?
4GB?
This means main memory not SGA.
Or better go with 64 bit?
kind regards
Toni
SLES9 SP3 and Oracle EE 10Alexei
Thanks for the your input.
In fact I agree with you about download drivers (I follow the same rule as you avoid downloading drivers or packages from the Internet if the system has one). WIt is all pretty sprange
(1) You SHOULD NOT download drivber from Emulex - SLES9 SP3 have driver
which works well and is wel tested with ALL systems (and if you download
driver you always risk to hHi List
We 're trying to set up a RAC environment using
Oracle 9.2.0.6 64-bit
SLES 9 SP3 64-bit
2 x Dell PowerEdge 2800
2 x HBA Emulex LP8000
1 x HP StorageWorks RA4100
Con |
|
|
